CNC plasma cutting system

Plasmasonic 2010 • 3015 • 4020 • 6020 • 12030

– This machine comes equipped with the semi-automatic control system for plasma and oxy-fuel cutting.

– The machine itself and its CNC system are optimally matched for production of various parts.

– Its design and structure allow for its operation under heavy conditions (2- or 3-shift operation).

Advantages:

– One carriage accommodating two cutters:plasma cutting head and oxy-fuel torch.

– Magnetic holder of cutter heads allowing for quick change and preventing them from being damaged incase of collision.

– Control system of the machine enables installation of up to 4 carriages (with plasma and oxy-fuel cutters and independent height control) in any combination.

– AC servo drives on two machine axes.

– Supporting and bearing structures of the machine are made with light-alloy materials; high-precision guideways, gears and racks are manufactured by renown international manufacturers. All this ensures required machining accuracy, light weight and structural rigidity as well as operational stability over the machine's service life.

– Ergonomic control panel allows control not only the machine itself, but also the power source, ventilation and filtration systems.

CNC control system

– Industrial PC.

– 17” LCD-display.

– Network card, USB port, disc drive, HDD 80 Gb, keyboard, mouse.

– CNC-program format: ISO ESSI, G– codes, DXF.

– Automatic cutter height control during igniting and piercing.

– Manual pressure adjustment for plasma and oxy-fuel cutting.

– Manual adjustment of gas flow for oxy-fuel cutting (torch adjustment).

– Automatic selection and semi-automatic setting of cutting parameters.

– Quick switch-over between cutting methods: plasma and oxy-fuel.

– CNC-programs can be loaded either from the machine's built-in storage, 3.5” floppy drive, operator's control panel, keyboard or USB disc drives.

– Smooth changing of speed at any time both in program and manual operation modes.

– Cutting layouts can be turned by any angle.

– Pre-setting of kerf compensation.

– All necessary data and information as to actual parameters and machine status are shown on the control panel display.

– Integrated library of standard parts is available.

– Operator can create cutting layouts using integrated graphics editor.

Technical specifications	P2010	P3015	P4020	P6020	P12030
Table length	2000 mm	3000 mm (117")	4000 mm (156")	6000 mm (234")	12000 mm (468")
Table width	1000 mm	1500 mm (58")	2000 mm (117")	2000 mm (117")	3000 mm (117")
Cutting speed	bis zu 7500 mm/min (292"/min)				bis zu 9800 mm/min (382"/min)
Positioning speed	15000 mm/min (580"/min)
Repeatability	+/- 0.05 mm (0.02")
Positioning accuracy	+/- 0.1 mm (0.04")
Type of arc height control	semi-automatic by arc voltage				Automatic by arc voltage
Control of gas pressure during cutting	semi-automatic				Automatic

Technical specifications of plasmatrons	P100A	P200A	PP130A	PP260A
Low-carbon steels
Cutting thickness	10 mm (0.4")	20 mm (0.8")	16 mm (0.6")	30 mm (1.2")
Max. piercing thickness	15 mm (0.6")	25 mm (1")	25 mm (1")	32 mm (1.2")
Max. thickness (non piercing)	20 mm (0.8")	45 mm (1.7")	38 mm (1.5")	65 mm (2.5")
Stainless steels
max. Cutting thickness	8 mm (0.3")	15 mm (0.6")	12 mm (0.5")	20 mm (0.8")
Max. piercing thickness	12 mm (0.5")	20 mm (0.8")	20 mm (0.8")	25 mm (1")
Max. thickness (non piercing)	15 mm (0.6")	38 mm (1.5")	25 mm (1")	50 mm (2")
Control of gas pressure during cutting	semi-automatic	semi-automatic	Automatic	Automatic
Gases used for plasma cutting	Air	Air	Oxygen, air, nitrogen, F5, H35	Oxygen, Air, nitrogen, F5, H35